Page 12 of 16
801525 v3.05 09.20 HT C Com Install Instructions
Note: The tube lengths are matched to the pumps performance and therefore CANNOT be lengthened
USB
CHILLED
OUTLET
MAINS
IN
Section 3
Command Centre Installation
BLUE
BRAIDED
Max
1490mm
336mm
Max 400mm
Min 35mm
3.2
Model C125, Model C175
Note:
- Mains hose length
is 750mm
- Plug and Cord
length is 1800mm
Position the Com-
mand Centre close
to the outlet tap,
within reach of
the hose and cord
lengths supplied
Note:
Note:
the hoses
the hoses
need to have a
need to have a
constant downward
constant downward
gradient to the
gradient to the
Hydrotap to allow all
Hydrotap to allow all
water to drain back
water to drain back
into the tanks.
into the tanks.
3.1
Hose and tube fitting
•
Remove all caps from the top of the Command
Centre
•
Fit the foam insulation to the Blue tube after
trimming to length.
•
Install the mains water braided hoses to the
Command Centre before locating the unit in place.
NOTE:
Do not over tighten
Con Strainer
90° Bend end
of Braided Hose
To HydroTap
Command Centre
Braided hose for
Mains Water Supply
From Mains
Water Supply
