Page 20 of 36
802253UK - Boiling chilled residential installation instructions - Aug 2015 - V2.02
Installation instructions
Installing the All-in-One ‘Vented’ tap
(see page 30 for Command-Centre
TM
installation).
1.19 All-in-One ‘Vented’ connections.
• Connect the red, blue and clear silicone tubes &
USB cable to the Command-Centre
TM
as shown.
• Working from inside the cupboard, attach
the braided hoses to the tube extensions
(ensure the seals on the end of the hoses are
lubricated). Check the correct position for mixer
and ambient connections by matching the
colours on the braided hoses with the coloured
markings on the extension tubes. (See adjacent
diagram).
• Connect the braided hose with the blue marking
to the ‘MIXER IN’ on the Command-Centre
TM
.
• Connect the braided hose with the white
marking to the Restrictaflow.
• Connect the braided hose with the red marking
to the metal tube, with red marking then to the
‘MIXER OUT’ on the Command-Centre
TM
.
• Ensure that all tubes and hoses are firmly
secured.
Braided hose
connection to metal
tube - ‘MIXER
OUT’ on Command-
Centre
TM
.
Braided hose with
blue marking - to
MIXER IN’
on Command-
Centre
TM
Clear silicone
tube - VENT on
Command-Centre
TM
Braided hose with
white marking -
Restrictaflow on
ambient supply
Red silicone tube -
BOILING OUT on
Command-Centre
TM
Blue silicone tube
- CHILLED OUT
on Command-
Centre
TM
1.18 Base block spider markings and silicone tube positions
(viewed from
underneath).
White marking
Blue marking
USB cable
Blue silicone tube
Red silicone tube
Clear silicone tube
Braided hose with
white marking
Braided hose with
blue marking
Braided hose with
red marking
RED
CLEAR
BLUE
BRAIDED
POWER
CABLE
USB
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT BYPASS
OUT CHILLED
OUT
Booster
HT Mixer
connections
BRAIDED
BRAIDED
BRAIDED
BRAIDED