Page 14 of 28
802265 - Sparkling HT- BCS Compact Commercial - Installation Instructions - 09.16 - v3.01
Booster Specifications:
Rating
Unit
Nominal Power Rating
2.2
kW
Nominal Current
10
A
Electric Supply 50Hz AC
230
V
Elect fl ex and plug (black) - 1 meter length (with 90º Aus-
tralian plug)
10
A
Fixed Flow Rate
1.2
L/min
Minimum water pressure
200
kPa
Section 3
Booster Heater
Mount base
Horizontally
3.1
Product Description
The boost unit is a compact electronically
controlled auxillary water heater. It is intended
to provide pre heating of water before it enters
the Zip HydroTap G4 boiling tank. The Booster
is supplied with the BCSHAV model. However,
it may be later installed, as an accessory for the
BCS model, to increase its delivery.
339 mm
Note1:
water connection
:Blue marking - water in
:Red marking - water out.
The braided hoses cannot be
lengthened.
Note2:
The electrical cable
length is 1.0 metre.
Note3:
Position the Booster
within reach of the fixed hose
lengths, keeping the Booster
as close as possible to the
undersink unit inlet/ outlet
fittings.
Note4:
Ensure the Booster
heater is mounted in an
upright position (as shown)
with a horizontal base
