Page 22 of 24
Hydro Tap Installation and Operating Instructions - 89026UK - June 2009
Symptom
Possible Cause
Solution
No LED display, no tap head
lights or, no water when tap
levers are operated.
No water flow.
Slow water recovery after
use.
Water not hot.
Water not chilled.
No power.
Plug is not located in power
socket.
Tap loom is not connected to
HydroTap unit.
Possible internal fault.
Program in OFF cycle
Water supply isolated.
Water supply not connected.
Power supply not connected.
Tap loom is not connected to
HydroTap unit.
Possible internal fault.
Program in OFF cycle.
Filter may require replacement.
Unit is in Sleep Mode.
Unit has just come out of OFF
cycle.
Possible internal fault.
Excessive use, unit refilling or
chilling down to temperature.
Possible internal fault.
Check power supply.
Ensure power plug is correctly fitted and switch is
turned ON.
Check loom connection.
Contact local Zip Service Provider.
Check LCD for information.
Check water supply is on.
Check to ensure plumbing connection is made.
Check power plug is correctly fitted and switch is
turned on.
Check for loom connection
Contact local Zip Service Provider.
Check LCD for information.
Check filter usage on LCD screen, if “filter
change” is displayed follow instructions
on page 13.
Touch Hot lever and wait for Red LED to stop
flashing.
Wait for Red LED to stop flashing.
Contact local Zip Service Provider.
Wait for Blue LED to stop flashing.
Contact local Zip Service Provider.
Trouble Shooting
Alternating display messages: More than one fault identified
at the same time
Record the number and type of faults
Contact local Zip Service Provider
The use of this crossed out wheeled bin logo indicates that this product needs to be
disposed of separately to any other household waste.
Within each of the European Union member countries, provisions have been made for
the collection and recycling of unwanted electrical and electronic equipment. Outside
of the EU it will be necessary to dispose of this product at your local community waste
collection or recycling centre.
In order to help preserve our environment we ask that you dispose of this product
correctly. Please contact your local city council for collection centre details
End of life disposal
Cleaning
Do not use strong, corrosive, spray or abrasive cleaners. Clean with a soft cloth or brush and mild soap and water.
Do not spray water over the tap as it may damage the low-voltage electronics.
Undersink units must never be located near, or cleaned with water jets.
