Hydro Tap Installation and Operating Instructions - 89026UK - June 2009 Page 17 of 24
Blue Chilled Water Light
On all the time:
This indicates that the temperature of the chilled water is within the usable
temperature range.
Flashing slowly :
This indicates that the chilled water is not at the right temperature. Wait up to
20 minutes. When the chilled water is at the right temperature, the light will
stop flashing. Note: The Zip HydroTap is designed to dispense chilled water in
the temperature range 7°C to 14°C.
During heavy usage, the temperature can rise out of this range.
Red Boiling Water Light
On all the time:
This indicates that the boiling water is ready.
Flashing slowly :
This indicates that the boiling water is below usable temperature.
Filter light
Filter Change Light Off:
This indicates the filter is operating within its normal specified life span.
Filter Change Light Flashing slowly :
The light will flash slowly when the filter is due for replacement and the
LCD will show “Filter Change”. Refer to “Replacing the filter” section of this
document.
Child Safety Lock (boiling / chilled models)
The child safety lock can be activated to prevent boiling
water flowing if the hot lever is inadvertently activated.
To activate
, first press the safety lock then depress the
Blue Chilled water lever for a period of approximately ten
seconds. The safety lock indicator light will now be illuminated.
To de-activate
, first press the safety lock then depress the
Blue Chilled water lever for a period of approximately ten
seconds. The safety lock indicator light will now extinguish.
To operate when the lock is ON
, depress both the Red lever and the safety
lock simultaneously.
Child Safety Lock (all boiling only models except HT models)
To activate the child safety lock, go to the LCD display, using menu
>
or
>
buttons, scroll to the Safety Lock display. To turn ON adjust
>
button, to turn
OFF adjust
>
button. After about 10 seconds the screen will default to the
selected mode. When activated the LED on the safety lock will be illuminated. If
de-activated the LED will be OFF.
To operate when lock is ON,
depress both the Red lever and the safety lock
simultaneously.
Operating the Tap
Note:
On the Boiling only models the Chilled
LED is blank.
Boiling
Chilled
Filter Change
Child safety Lock
