Zip AP3/05 Installation, Maintenance And User Instructions Download Page 13

Warranty

The Zip appliance you have chosen is precision-built from the finest materials
available and should give many years of trouble free service.

Certain warranties may be implied by law into your contract with Zip. The
warranty provided below is additional to these implied warranties and nothing
set out below shall limit your statutory rights or rights at law.

Zip Heaters (UK) Ltd warrants that, should any part fail within 12 calendar
months of installation, that part will be repaired or replaced free of charge by Zip
or its Distributor or Service Provider, except as set out below, provided the
appliance is installed and used strictly in accordance with the instructions
supplied, and that failure is not due to accident, misuse, abuse, unsuitable
water conditions, or to any alteration, modification or repair by any party not
expressly nominated by Zip.

No costs are payable by the customer other than any mileage or travelling-time
charges incurred by a Zip Service Provider or the cost of removal, cartage and
re-installation of any component of the appliance if it needs to be returned for
repair to Zip or its Distributor.

This warranty does not cover damage resulting from non-operation of the
appliance or consequential damage to any other goods, furnishings or property.

Zip does not exclude, restrict or modify any liability that cannot be excluded,
restricted or modified or which cannot, except to a limited extent, be excluded,
restricted or modified as between the owner or user and Zip under the laws
applicable.

Furthermore, this warranty does not displace any statutory warranty, but, to the
extent to which Zip is entitled to do so, the liability of Zip under any statutory
warranty will be limited at Zip's option to the replacement of the appliance or
supply of equivalent appliance, the payment of the cost of replacing the
appliance or acquiring an equivalent appliance, or the payment of the cost of
having the appliance repaired or the repair of the appliance.

Zip Heaters (UK) Ltd

14 Bertie Ward Way

Dereham, Norfolk NR19 1TE

Telephone 0845 602 4533

Telefax 01362 692448

www.zipheaters.co.uk

14                                                                

AP3/05, AP3/10, AP3/15 Installation Instructions  

New Aquapoint lll qxd:New Aquapoint lll qxd  5/11/08  15:51  Page 13

Summary of Contents for AP3/05














Reviews: