801525 - Chilled HydroTap Installation Instructions - March 2016 - v3.00
Page 11 of 16
Note: The tube lengths are matched to the pumps performance and therefore CANNOT be lengthened
POWER
CORD
USB
CHILLED
OUTLET
MAINS
IN
Note:
All silicon
tubes must be cut to size.
They must have a constant
fall back to the unit.
Section 3
Undersink Unit Installation
BLUE
BRAIDED
3.1
Hose and tube fitting.
(Do not overtighten)
•
Remove all caps from the top of the undersink unit.
•
Fit the foam insulation to the Blue tube after trimming to length.
•
Install the mains water braided hoses to the undersink unit before locating the unit in place.
336mm
MAX
1490 mm
MAX
400 mm
Min
35 mm
3.2
Model C125
Model C175
Note:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the under
sink unit close
to the outlet tap,
within reach of
the hose and cord
lengths supplied
