Page 8 of 12
Zip Hydroboil - Installation & Operating Instructions - 81419 - January 2004
#
Section Heading
Factory dip switch
settings
single element.
Factory dip switch
settings
multi element.
Wiring Diagrams
Operating proceedures
continued
15 Lt & 25Lt HB SINGLE ELEMENT
WITH PCB CONTROLLER
WIRING DIAGRAM
40 Lt HB MULTI - ELEMENT
WITH PCB CONTROLLER
WIRING DIAGRAM
Reading the Display Screen
Power On
When the text 'Power On' is illuminated this indicates that the power is
connected and turned on and that the heater is operating normally.
Boiling Water
When the text 'Boiling Water' is illuminated this indicates that the contents of
the boiling chamber has been brought to boiling point and is being maintained
(normally within 1°C of boiling point). During the initial heat-up the contents of
the boiling chamber may be below boiling point for a period, and during that
period the text 'Boiling Water' may not be illuminated.
Filter Active
If your Zip Hydroboil is specified with a filter the ‘ Filter Active’ text will normally
be illuminated. This indicated that the filter is within its specified lifespan.
Change Filter
If your Zip Hydroboil is specified with a filter the ‘Change Filter’ light will
illuminate when the filter is due to replacement. The local toll free number
(directly above) will also illuminate showing the Zip service number
1800 638 633.
Cleaning Case
Do not use strong, corrosive, spray or abrasive cleaners. Clean the case with a
soft cloth or brush and mild soap and water.
Boiling Water
Display Screen
