UserGuide
-31-
www.zioncom.net
Notes: Please save IP Router Configuration after completion, otherwise
configuration will lose when power off or restart.
Other Configuartion:
MTU
: Input MTU value of data package ,default value is 1454. Normally
please do not change it.
Disconnect PPP session if idle time is longer than Min
: If you
choose this option and setup the time T, then the IP router automatically
disconnects from Internet after T idle time.
Connect On Demand:
IP Router can automatically connect with Internet
if there is Internet access after disconnection. Note: during usage if there
is disconnection due to external causes, then the IP Router will try to
connect with Internet at once until successful connection. This function is
the IP Router inner function and does nothing with
Connect On Demand
function.
Connect On Demand
is only effective to
Disconnect PPP
session if idle time is longer than Min
.
Connect Manually:
By this option users have to connect with Internet
manually after disconnection. This option is only effective to
Disconnect
PPP session if idle time is longer than Min
.
Prevent reconnection although no response from PPP server:
This
option is to shut off IP Router inner automatic connection function. By
choosing this option if external network disconnects, IP Router will not try
to connect at once.
6.3 DYNAMIC IP USER (Cable/Modem…) SETUP
By this connection way IP Router can get IP address automatically from ISP
(such as: CHINA TELCOM). It is suitable for connection ways such as Cable
Modem, LAN and so on.
UserGuide
-32-
www.zioncom.net
¾
Turn on the external Cable Modem and check the WAN LED of IP
Router.
If WAN LED is off, please re-confirm the network cable between
external Modem and WAN port.
¾
Click
“Basic Setup”
->
“WAN Setup”
as diagram:
¾
Choose
Dynamic IP user (Cable Modem…)
¾
Click
Apply
to complete.
¾
You will see the following pop-up window
¾
If
Conn. status
is
“Successful connected”
, the configuration is correct.
Click
“Show Internet Information”
and see the
6.5.1
