33
SSID in your client settings.
IAPP (Inter-Access Point Protocol)
This function will let Wireless Stations roam among a network environment
with multiple devices. Wireless Stations are able to switch from one device to
another as they move between the coverage areas. Users can have more
wireless working range. An example is as the following figure.
You should comply with the following instructions to roam among the wireless
coverage areas.
Note
：
For implementing the roaming function, the setting MUST comply the
following two items.
z
All the devices must be in the same subnet network and the SSID must
be the same.
z
If you use the 802.1x authentication, you need to have the user profile
in these devices for the roaming station.
Block WLAN Relay (Isolate Client)
The device supports isolation function. If you are building a public Wireless
Network, enable this function can provide better security. The device will block
packets between wireless clients (relay). All the wireless clients connected to
the device can’t see each other.
Transmit Power
The default transmit power of this device is 26.65dBm for CCK (802.11b) and
21.96dBm for OFDM (802.11g). In case of decrease the wireless distance and
coverage of this device, turn down the power level for CCK and OFDM. For
CCK, 4 levels are available to turn down the power from default 26.65dBm to
25.65, 24.65, 23.65,22.65dBm. For OFDM, 3 levels are available to turn down
the power from default 21.96dBm to 20.96, 19.96, 18.96dBm.
If you want to restore the wireless distance and coverage of the device, select
a higher level or the default level of transmit power.
