27
Configure DEV5:
1.
Access the web server (
http://192.168.2.254
) of device from the Ethernet port.
Caution
If you configure multiple devices in the same PC, since the devices have the
same default IP address but different MAC addresses, it may cause you
can’t access the web server of device. If the situation happens, please try to
clean the ARP table of your PC by DOS command “arp –d” then you can
access the web server of device using the default IP address.
2.
Use Wizard page to setup device.
3.
Press “Next>>” button then set the “Operation Mode” to “Wireless ISP” mode.
4.
Press “Next>>” button then disable “Time Zone” function.
Summary of Contents for ZWA-G192-OD
Page 20: ...20 ...
Page 22: ...22 5 Use the Status page to check the settings ...
Page 26: ...26 ...
