Zinwell ZWA-G192-OD, User Manual, Page: 5 / 31

5
RJ-45 Cable 6 dBi omni directional antenna
2.5” /4” U bolt and Anchor
Hardware Installation
Once you check off everything from the package, you can start to install the
ODU. You can mount to a pipe, a pole or to the side of a building. The
steps are showed in the following
：
1. You must mount the ODU into the bracket first.
Note: ALL the 4 screws had been tightened onto the ODU and
bracket
2. You can use the 2 or 4 inches U bolt to mount on the pipe, depending on
the radius of the pipe. (Wall mounting is referred to Wall Mounting
Figure) The two U bolts must be mounted tightly. Be aware of not
over-tighten the U bolt.
Pipe Mounting Figure