Legal Notice
This manual is a ‘living document’ The information in this manual is subject to change without notice. The latest
version can be downloaded from www.zinter.com
ZINTER LTD. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MACHINERY OR MATERIAL,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
Zinter Limited shall not be liable for errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this Equipment or associated material. Changes or
modifications to the system not expressly approved in writing by Zinter Ltd, the party responsible for compliance,
could void the user’s authority for use.
Zinter Ltd reserves the right to amend its product specifications, firmware and associated guides, software and
manuals without notice. Images used are for guidance only and may differ from your machine.
This document is protected by copyright. All rights reserved. Its use, disclosure, and possession are restricted by an
agreement with Zinter Ltd. per software copyright. No part of this document may be photocopied, re-produced or
translated into another language without the prior written consent of Zinter Ltd.
Zinter Limited offers a 1 year warranty, refer to the warranty terms at www.zinter.com
E&OE
Your heated bed and Extruders run
at very hot temperatures. Please
read and understand this guide
before printing to avoid serious
burns or injury.
introduction
Trademarks
Apple, Windows, Simplify 3D, Colorfabb and all other trademarks where used belong to their respective owners.
The Zinter Freedom is intended to
remain within the solid case.
Removing the printer from the
case
exposes
live
wires
-
disconnect from mains before
removing from case.
Page 2
