removing a print
A wallpaper scraper, or pallet knife, kept flat against the print glass
is ideal for removing the model from the print bed.
i
Do not try to remove the model from the print bed before the
nozzles and the bed have cooled. Doing so may cause burns or
damage to your model or printer.
i
Once the Zinter
®
Freedom has finished printing, the extruder’s will return to the ‘Home’
Position, and the Bed will lower to the bottom of the print area. the bed and nozzles
will begin to cool It is advised that you wait approximately 10 minutes for cooling to
complete before removing the print.
Page 23
Excellence in Additive Manufacture