ZincFive UPStealth 2, User Manual

Page: 48 / 74

45 | UPStealth® 2 User Manual
UPStealth® 2 Software
Introduction
The UPStealth 2 Software is used to remotely manage and monitor the status of an individual UPStealth 2 inside
your network of traffic cabinets. You can access any UPStealth 2 UPS 1000W by entering its IP Address (see "Network
Settings ") into the address field of an internet browser window. You must be on the same network as the UPStealth 2.
Once you are logged in, the software will launch and display information on that UPStealth 2 unit.
Features
(Items with an asterisk (*) can only be done via the UPStealth 2 software, not via the controls on the unit itself.)
• View power status
• View the battery charge status and runtimes
• View real-time cabinet power consumption
• Configure Simple Network Management Protocol (SNMP) communication to be notified of system status*
• Assign a name to a UPStealth 2 unit, allowing users to quickly locate it and view its current status*
• View the System Log to help diagnose system power failures
• Set up the eight programmable relays to trigger on system configured events. (Event outcomes that require an SNMP or SMTP
actions can only be set up via the UPStealth 2 software.)
• View whether a system configured event has triggered
• View AC waveforms in the event log*
• View live AC waveforms*
• View and manage user-programmable system settings parameters such as system time, voltage thresholds, and power moni-
toring sensitivity levels.
• Configure SMTP*
• Configure Network Settings*
• Update Firmware*
UPStealth 2 Software