Function check
12
Page 21
Routine inspection of the
system
The sheathing of the device's power supply line, the applicator connection cable, etc., must
not be allowed to come loose, and the inner wires must not be exposed or damaged by
external impact.
The applicator should not show any traces of oil leaks.
Wipe the outside of the device so that there is no foreign matter.
The device operation button, etc., must not be loose.
The various parts attached to the device must not be loose.
If any of the above occur, please ask your service partner for help.
Safety check
To ensure safe use, internal cleaning should be performed once a year by a person
authorised by Zimmer MedizinSysteme GmbH.
To ensure
safe use, have the system, including its internal components and output voltage,
checked once a year by a person authorised by the company.
Please clean the applicator before storing it.
Check the device before use if you have had it in storage for a long time.
Please note the following directions concerning storage conditions:
•
Protect against water
•
Keep away from direct sunlight
•
Do not store near heaters
•
Avoid locations exposed to excessive impacts or vibrations, chemicals or explosive
gases.
Troubleshooting
If the device does not operate properly during use, please check the points listed in the table
before requesting service. If none of the following problems has occurred or the subsequent
actions do not help, turn off the device and contact your service partner.
Summary of Contents for Z Field Dual
