Zimmer Z Field Dual, Instructions For Use Manual

Page: 16 / 47

Setting up the device
4
Page 6
Caution
!
After transport and before switching on the device, make sure that the swivel wheels are in
the "locked" position.
Note: Make sure the Z Field
Dual
is on a stable and level surface.
Connecting the mains
cable
Plug the mains cable (21) into the socket on the device (9) as shown below and connect it to
the mains.
The device may only be connected to earthed sockets.
Switching on the device Switch on the device using the on/off switch (10).
Caution
!
Note that connecting the mains cable while the on/off switch is on may cause malfunctions.
Caution
!
If the applicator is used in a slanting position, the cooling oil does not reach all areas of the
applicator and damage is caused due to overheating. For this reason, it is recommended to
place the applicator in a horizontal position if possible.
Switching the device off
The device is switched off using the on/off switch (10).
In order to completely disconnect the device (all-phase) from the mains, remove the mains
cable.