Zimmer Z Field Dual, Instructions For Use Manual

Page: 24 / 47

Operating instructions
6
Page 14
Select the parameter to be modified. Freq1, on time, off time, strength and repetitions can
be set in this mode by changing the parameter values on the central control knob (4).
Each mode has 5 sub-modes with different parameter sets. The manual mode works
sequentially from sub-mode 1 up.
Pressing the pen icon at the end of the parameter setting screen at the top right adds a
sub-mode.
To remove a sub-mode, select the sub-mode in question and press the rubbish bin icon in
the top right corner.
After entering the name and parameter values for the manual mode programme, click the
close icon (X) at the top right to close the parameter settings screen.