INSTALLATION AND OPERATING INSTRUCTIONS:
Tool changer, pneumatic, WWR1000 series
Zimmer GmbH
●
Im Salmenkopf 5
●
77866 Rheinau, Germany
●
Phone: +49 7844 9138-0
●
Fax: +49 7844 9138-80
●
www.zimmer-group.de
13
DDOC00291 / 0
EN / 2018-09-1
1
10 Technical data
INFORMATION:
Please refer to our website
www.zimmer-group.de
for “Technical data.”
This data varies within the series depending on the specific design. If you should have further questions about
products or “Technical Data,” please contact ZIMMER GmbH customer service.
+49 7844 9138 -0.
11 Maintenance
Maintenance-free operation of the element is guaranteed for up to 5 million cycles.
The maintenance interval may shorten under the following circumstances:
•
Drive with non-filtered compressed air (10 µm) – dry or lubricated.
• Unclean environment.
• Use not in accordance with performance data.
•
Ambient temperature above 60 °C; lubricants harden faster.
Each time the element is serviced, the seals should be replaced, while the mechanical parts and cylinder should be
lubricated.
We recommend having Zimmer Group service carry out this work.
Dismantling and reassembling the element without authorization may result in complications, as special installation
equipment is required in some cases.
For relubrication, ZIMMER GmbH recommends:
• Mechanical parts: MOLYKOTE BR2plus or an equivalent lubricant.
• Cylinder: RENOLIT HLT2 or an equivalent lubricant.
