Zimmer Soleo Sono, Instructions For Use Manual, Page: 27 / 52

Operating Instructions
9.2 Displays/Buttons
9
Page 18
Description of the
display elements and
buttons
(1) Intensity The bar graph displays the currently set intensity. The intensity is adjusted using the
left controller.
(2) Start / Stop Pressing the button starts or stops the therapy.
(3) Penetration The bar graph shows the current frequency ratio, ranging from 0.8 MHz (800 kHz) to
2.4 MHz, as a percentage. The percentage frequency ratio is adjusted using the right
controller.
(4) Status bar The status bar shows information regarding the current therapy status. If therapy is
not active, the "Ready" display appears; when therapy is in progress the text "Active"
appears.
(5) Therapy time Displays the therapy time for the selected program.
Using the arrow buttons, the preset therapy time can be increased or shortened. After
the start of therapy, the current remaining therapy time is displayed.
(6) Title bar In the title bar, the name of the current ultrasound therapy program is displayed.
(7) Pulse The display shows the selected mode (continuous or pulsed)
In "pulsed" operating mode, the pulse ratio (in this case 1:2) and pulse frequency (in
this case 50 Hz) are displayed.
(8) Coupling Coupling display. The coupling is digitally displayed as a percentage.
(9) Parameters Displays the active ultrasound head.
Activating the window opens the "Ultrasound parameters" window. Here the
ultrasonic mode can be selected and the ultrasound head switched to water bath
therapy (see Section 9.3).
3
2
1
4
6
5
9
8 7