Zimmer Soleo Sono, Instructions For Use Manual, Page: 18 / 52

7 Device Set up
7.1 Installation of Cables
7
Page 9
Note: There are coloured arrows located on the cables as a guide for proper connection
to the device.
Ultrasound therapy Connect the ultrasound head to the appropriate socket (16).
Connect the mains
cable
Connect the mains cable to the appropriate socket (13) and connect the cable to
the mains.
Note: The device may only be connected to power outlets with a protective contact.
Switch the device on The device is switched on via the toggle switch (11).
Switch the device off The device is switched off via the toggle switch (11).
To completely disconnect the device (all-phase) from the network, remove the
power cord.
Caution
!
All cables must be protected against jamming or other mechanical damage.
Note: All of the buttons, menus and sub-menus can be activated directly on the screen
using your finger or a touch pen.