Zimmer Soleo Galva Operating Instructions Manual Download Page 49

Page: 49 / 144

Description of the selection buttons

Channel Group

In Mono

stim

mode, channel 1 or channel 2 can be activated for the desired

therapy.

Activates channel I, channel I is active.

Activates channel II, channel II is active.

Synchronisation group

The surge output is defined here for the Twinstim and Duostim modes.

Alternate activation:

The current forms are started and stopped simultaneously on both channels.

The surges are alternate.

Parallel activation:

The current forms are started and stopped simultaneously on both channels.

The surges are simultaneous.

Separate activation:

The current forms are started and stopped separately on both channels.
The surges are independent of one another.

Can only be activated in Duostim mode.

Summary of Contents for Soleo Galva

















































































































































Search results

Summary of Contents for Soleo Galva

Reviews:

Related manuals for Soleo Galva

Brands by name

Popular brands

Zimmer Soleo Galva, Operating Instructions Manual

Search results

Summary of Contents for Soleo Galva

Reviews:

Related manuals for Soleo Galva

Brands by name

Popular brands