38
12.16.1.4 Application settings
►
Enable the option
expertZ as start
if
expertZ
is to be displayed as the new start view.
To get full access to all the parameters,
expertZ fine tuning
mode must be switched off.
►
Disable the option
expertZ fine tuning
.
►
In the
Application settings
area, enable the
USB master only
option if network communication is to be switched off.
►
Enable the option only if you have a Zimmer PrepBox with a USB cable.
Ö
The HMI software searches for USB nodes only.
12.16.1.5 SCM network settings
►
In the
IP address
area, click the field to change the IP address of the SCM.
►
Close the
Service
window.
►
Run out a cold boot.
INSTALLATION AND OPERATING INSTRUCTIONS:
LWR50F-01-03-A
DDOC01360 / -
EN / 2022-05-09
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
Summary of Contents for MATCH LWR50F-01-03-A
Page 2: ......
