INSTALLATION AND OPERATING INSTRUCTIONS:
Motor spindle, HF150-003 series
9
Zimmer GmbH
•
Im Salmenkopf 5
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
+49 7844 9138 80
•
www.zimmer-group.com
EN / 2020-10-22
DDOC00746 / -
5 Proper use
NOTICE:
The motor spindle is to be used only in its original state with its original accessories, without any unauthorized
changes and within the scope of its defined parameters for use.
Zimmer GmbH shall accept no liability for any damage caused by improper use.
The motor spindle is designed for installation in machines with separating safety equipment in accordance with EN ISO
14119 and for the following production methods:
•
Machining with geometrically defined cuts/dry machining (DIN 8589-0) for non-abrasive materials.
•
Drilling, counterboring, reaming (DIN 8589-2)
•
Milling (DIN 8589-3)
•
Grinding (DIN 8589-0)
The motor spindle is used to hold and drive cutting tools.
Permitted materials:
•
Wood
• Plastics
•
Light metals, non-ferrous metals or comparable materials
Any other or more extensive use is improper. Zimmer GmbH accepts no liability for any damage resulting from improper
use. The operator/user bears sole responsibility.
6
Personnel qualification
DANGER:
Intervention is not permitted and can lead to serious injuries!
Ö
Warranty and disclaimer
Installation, commissioning and maintenance may only be performed by qualified personnel.
These personnel must have read and understood the installation and operating instructions in full.