16
11 Maintenance
CAUTION
Material damage resulting from blowing out with compressed air
Blowing out the product with compressed air can cause malfunctions and pose a risk of accidents.
►
Never purge the product with compressed air.
CAUTION
Material damage caused by liquid and solvent-based cleaners
Liquid and solvent-based cleaning agents can cause malfunctions and pose a risk of accidents.
►
Do not clean the product with any cleaning agents that are liquid or contain solvents.
INFORMATION
Non-compliance may result in material damage.
If the product is constantly subjected to an alternating direction of rotation, the maximum number of rotations will
no longer be reached.
The actual service life depends on the following factors:
• Speed
• Changes in direction of rotation
• Environmental conditions (humidity, temperature)
• Handling weight
• Electrical voltage and amperage
• Continuous operation with sealing air and its quality
Maintenance-free operation of the product is guaranteed for up to 10 million cycles.
The maintenance interval may be shortened under the following circumstances:
• Dirty environment
•
Improper use and use that does not comply with the power specifications.
• Ambient temperature is too high.
►
Even though the product is maintenance-free as mentioned above, perform a regular visual inspection to check for any
corrosion, damage or contamination.
►
Have maintenance work be performed by Zimmer Customer Service whenever possible.
Ö
Dismantling and reassembling the product without authorization may result in complications, as special installation
equipment is required in some cases. Zimmer GmbH accepts no liability for any resulting malfunctions or damage.
12 Decommissioning/disposal
INFORMATION
When the product reaches the end of its operational phase, it can be completely disassembled and disposed of.
►
Disconnect the product completely from the power supply.
►
Dispose of the components properly according to the material groups.
►
Comply with the locally applicable environmental and disposal regulations.
NOTICE
Continuous operation with sealing air
►
Have the product removed and relubricated by Zimmer Customer Service at least every 6 months.
INSTALLATION AND OPERATING INSTRUCTIONS:
DVR
DDOC00222 / g
EN / 2022-01-13
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
Summary of Contents for DVR Series
Page 2: ......
