INSTALLATION AND OPERATING INSTRUCTIONS:
Collision protection, pneumatic, CSR series
Zimmer GmbH
•
Im Salmenkopf 5
•
77866 Rheinau,Germany
•
+49 7844 9138 0
•
+49 7844 9138 80
•
www.zimmer-group.com
4
EN / 2020-09-15
DDOC00267 / b
1 Supporting documents
NOTICE
Read through the installation and operating instructions before
installing the product.
The installation and operating instructions contain important notes for your personal safety. They must be read
and understood by all persons who work with or handle the product during any phase of the product lifetime.
The documents listed below are available for download on our website
www.zimmer-group.com
:
• Installation and operating instructions
• Catalogs, drawings, CAD data, performance data
• Information on accessories
• Technical data sheets
• General Terms and Conditions of Business, including warranty information
Ö
Only those documents currently available on the website are valid.
2 Safety notes
CAUTION
Risk of injury in the event of improper installation, commissioning or maintenance and improper use.
Non-compliance may result in severe injuries!
Installation, commissioning, maintenance and repairs may only be performed by qualified specialists in
accordance with these installation and operating instructions.
The product is state-of-the-art. It is installed on industrial machines and used to hold tools or mounting pieces.
The following are examples of situations in which the product may cause a hazard:
• The product is not properly installed, used or maintained.
• The product is not used for its designated purpose.
• The locally applicable regulations, laws, directives or guidelines are not observed.
• The Accident Prevention Regulations and installation and operating instructions are not observed.
The product may only be used in accordance with these operating instructions and the product's technical data.
Any changes or additions to the intended use of the product, as well as modifications to the product, such as
those in the following examples, require the written permission of the manufacturer:
•
Use of the product under extreme conditions, such as aggressive fluids or abrasive dusts
• Additional drilled holes or threads
Ö
Zimmer GmbH shall accept no liability for any damage caused by improper use. The operator bears sole
responsibility.
Installation, commissioning, maintenance and repairs may only be performed by qualified specialists in
accordance with these installation and operating instructions.
►
Make sure that the power cables are disconnected before you install, retool, maintain or repair the product.
►
When the product is used under extreme conditions, the maintenance interval must be adapted depending
on the extent of the contamination.
