Zimmer Biomet Zfx EvolutionNEXT, Manual

Page: 62 / 66

Zfx™ Evolution NEXT
62
The coding marks of the Zfx Synchronizer are detected
automatically. If a code cannot be read, please refer to the
information in
→
Chapter 8 “Operating faults”.
Continue scanning by clicking the right
“arrow button”
NOTE
The program will only recognize coded Zfx Synchronizers.
The user can now decide whether to gather further data.
Confirm by clicking the “Additional Scan” dialog button –
the additional scan will be started,
→ Chapter 4.5.6 “Additional scan in scan step –
Additional Scan“
If an additional scan is unnecessary as all relevant data have
been gathered,
confirm by clicking the right
“arrow button”
The data are recalculated and summarized in a 3D data set.
This process takes a few seconds; please check the
progress bar.
When the data have been gathered, the program
automatically advances to the next step.
Step 2 / 3 – Upper jaw scan
It is not necessary to switch to the next step manually
(optional)
→
Chapter 4.5.2 “Scan Assistant / Help”
×
Remove the synchronizer from the scanner.
×
Remove the denture from the Zfx Synchronizer –
see description of Zfx Synchronizer
×
Fix the upper jaw model on the model base and place in
the scanner
Confirm by clicking the right ”arrow button”