Zimmer Biomet Zfx EvolutionNEXT, Manual

Page: 49 / 66

49
6.3 Practical examples
Two practical examples on the following subjects can be found in
→
Chapter 10 – “Practical examples”.
Match holders
Scan implant with coded match holders
Articulator
Scan a complete jaw/antagonist alignment
6.4 Abort scan
A scan can be aborted between every step of a scan order by clicking the “Close Window” exit button with the exception
of a scan which has already been started. In this case, the user must go back by clicking the left arrow button and then stop
the scanning process.
A step cannot be aborted, regardless of whether a scan has already been performed or not.
All data already gathered at the time the scan is aborted is automatically saved in the patient file created with
Zfx Manager 2.0.
6.5 Restarting an aborted scan order
An already existing scan order can be restarted at a later stage.
The data stored in the patient file is reloaded automatically into the scan program from Zfx Manager 2.0.
1 Start Zfx Manager 2.0
2
Open the patient file
3 Start the scan program using the Scan button
or enter the scan program directly by opening the patient file from Explorer.
The Scan Assistant shows whether data have already been gathered by means of the image background:
Scanning steps can be repeated, skipped or missing scan steps added as required.
Green background
Data relating to the scanning step
already exist
Blue background
Data relating to the scanning step
still missing