ZMOTION
®
Intrusion Detection Development Kit
Quick Start Guide
QS007802-1014
Page 6 of 10
To assemble this flat lens and holder, observe the following brief procedure.
1. Place the lens into the inside of the cap, ensuring that the grooves of the lens are facing
inward.
2. Place the cap over the base, ensuring that the top of the lens is toward the arrow on the
base. Use the provided ¾" machine screws (2) with a nut to secure the cap in place, as
shown in Figure 5.
Figure 4. Flat Lens: ZWA12GI12V4
