ZMOTION
®
Intrusion Detection Development Kit
Quick Start Guide
QS007802-1014
Page 5 of 10
Installing the Lens
When mounting the ZMOTION Development Board vertically, special con-
sideration should be taken regarding the height, angle and level plane of the
board. Be sure to follow the lens manufacturer’s recommended height and
mounting angle requirements to ensure optimal performance.
Flat Lens Holder
The flat lens holder, shown in Figure 3, is a two-piece assembly that provides a 1.2" focal
length mounting. Figure 4 shows the detail of the ZWA12GI12V4 lens, with its correct
orientation.
Figure 3. Flat 1.2
"
Lens Cap (Top) and Lens Base (Bottom)
Note:
