background image

Ethernet Smart Cable

User Manual

UM020705-1012

Page 13 of 13

DO NOT USE THIS PRODUCT IN LIFE SUPPORT SYSTEMS.

LIFE SUPPORT POLICY

ZILOG'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPO-
NENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS 
PRIOR WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF 
ZILOG CORPORATION. 

As used herein

Life support devices or systems are devices which (a) are intended for surgical implant 
into the body, or (b) support or sustain life and whose failure to perform when properly 
used in accordance with instructions for use provided in the labeling can be reasonably 
expected to result in a significant injury to the user. A critical component is any compo-
nent in a life support device or system whose failure to perform can be reasonably 
expected to cause the failure of the life support device or system or to affect its safety or 
effectiveness.

Document Disclaimer

©2012 by Zilog, Inc. All rights reserved. Information in this publication concerning the 
devices, applications, or technology described is intended to suggest possible uses and 
may be superseded. ZILOG, INC. DOES NOT ASSUME LIABILITY FOR OR PRO-
VIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION, DEVICES, 
OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO DOES NOT 
ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT 
RELATED IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECH-
NOLOGY DESCRIBED HEREIN OR OTHERWISE. The information contained within 
this document has been verified according to the general principles of electrical and 
mechanical engineering.

Z8 Encore!, Z8 Encore! XP, ZNEO and eZ80Acclaim! are trademarks or registered trade-
marks of Zilog, Inc. All other product or service names are the property of their respective 
owners.

Warning:

Summary of Contents for ZENETSC0100ZACG















Reviews: