ZGR SOLAR STR 250
Operation manual
www.zigor.com
5
Precautions on receiving the unit
1.4
Visually check that the warehouse location is adequate by checking its characteristics (clean, free of leaks with
good ventilation); the floor must be level and have sufficient load resistance for the equipment.
Checking the material
On receiving the material, a visual inspection should be made in order to detect any anomalies that may have
occurred during transport.
List and check all the items indicated on the delivery note. Should any component be missing, notify the
forwarding agent within the established deadline.
Extract all parts from the packaging and examine the unit for any damage caused during transport.
Report any damage to the forwarding agent and
ZlGOR
.
Check that the material delivered corresponds to the delivery note. Check the manufacturer's label placed at the
rear or on one side of the unit.
Responsibility for the loss or damage of Products shall transfer to the Customer from the moment
ZIGOR
, places
these at his disposal in the place indicated by the Customer.
The wheeled bin crossed out on the product, in the documentation or on its packaging, means that the
electrical-electronic devices and batteries must be collected separately at the end of their life cycle.
Before the deposit of the RAEE in their collection facilities, the batteries must be removed and deposited
separately from the rest of the RAEE for proper management, according to the current local legislation and
environmental regulations.
Never dispose of with household waste. In this way it will help preserve the environment.
These symbols are valid in the European Union and in those places where separate collection systems are
available.
Correct disposal of batteries:
Used batteries are reusable consumer products and a recycling
process must be carried out.
Used batteries that do not go through the recycling process must be disposed of according to
the instructions regarding special waste, in accordance with the regulations and environmental
requirements in force in each country or community. This requirement applies in the European
Union and in those places where separate collection systems are available.
In case of doubt, consult the manufacturer.
In this way it will contribute to conserve the environment.
From then on, the customer will have 24 hours to make any claim under guarantee for any anomaly in the
amount or quality of the products received, providing details of the material received in bad condition after
reporting this circumstance on the forwarding agent's delivery note on reception.
Should the customer not report any defect within 24 hours, it will be understood that he has accepted delivery
of the unit.
