background image

 

 

 

 

Warranty Information 

Powered Product Warranty 

Zigen warrants its powered products against any defects in materials and 
workmanship for a period of three years from the date of invoice. Touchscreen displays 
carry a one year parts and labor warranty. If a malfunction occurs during the warranty 
period, Zigen will repair or replace a product to its original operating condition. A 
return authorization number must be obtained from Zigen before products are 
returned for service. 
 

Non-Powered and Cable Products - Lifetime Limited Performance Warranty

 

Zigen warrants that its non-powered products and cable products will be free from 
defects in material and workmanship for as long as you or your customer owns the 
product. All Zigen non-powered products and cables are designed and engineered to 
meet and exceed performance specifications. If, at anytime, the product fails due to  
manufacturer defect, Zigen will repair or replace the product to ensure that it meets 
original performance specifications. Reduced performance due to normal wear and tear, 
or damages caused by misuse or negligence will not be covered. Zigen will test and 
evaluate all non-powered and cable products claimed defective. Products must be 
shipped to Zigen, prepaid along with proof of purchase only after obtaining a Return 
Merchandise Authorization (RMA) number from Zigen. This statement of policy is in 
lieu of any other policy expressed or implied and no representative or person is 
authorized to assume any other liability or adopt any other policy for Zigen without our 
written consent. 
 

Return Policy 

If you would like to return a Zigen product, it can be done within 30 days of purchase for 
a full refund, less shipping and handling. Zigen will not be responsible for shipping and 
handling of product returns. Returns will only be accepted of products with proof of 
purchase, products in the original packaging with zero to minimal use and a Return 
Merchandise Authorization RMA number provided by Zigen.  
 
 

Summary of Contents for ZIG-POC-70L




















Reviews: