background image

 

 

 

 

Important Safety Instructions 

1. Do not use this product near water. 
 

2. Do not block any ventilation openings. Install in accordance 

with the manufacturer’s 

    instructions. 
 

3. Do not install or place this product near any heat sources such as radiators, heat 
    registers, stoves, or other apparatus (including amplifiers) that produce heat. 
 

4. Protect the power cord from being walked on or pinched particularly at plugs, 
    convenience receptacles, and the point where they exit from the apparatus. 
 

5. Only use attachments/accessories specified by the manufacturer. 
 

6. To reduce the risk of electric shock and/or damage to this product, never handle or 
     touch this unit or power cord if your hands are wet or damp. Do not expose this 
     product to rain or moisture. 
 

7. Unplug this apparatus during lightning storms or when unused for long periods of time. 
 

8. Refer all servicing to qualified service personnel. Servicing is required when the 
    apparatus has been damaged in any way, such as power-supply cord or plug is 
    damaged, liquid has been spilled or objects have fallen into the apparatus, 
    the apparatus has been exposed to rain or moisture, does not operate normally, or 
    has been dropped. 
 

9. Batteries that may be included with this product and/or accessories should never be 
    exposed to open flame or excessive heat. Always dispose of used batteries 
    according to the instructions. 

Summary of Contents for ZIG-POC-70L




















Reviews: