ZIEHL-ABEGG ZAdyn4CA HY Series, Quick Start Manual

Page: 18 / 28

7 Parameter list
The parameter list is in the chapter "Parameter list" in the operating instructions R-TBA12_01.
Parameters only used in the case of the ZAdyn4CA HY:
Control system menu
Parameter Designation Value range
Factory set-
ting
HY_Auto Setting the tuning function phases
0: Off
1: 1: empty 1
2: 2: empty x
3: 3: full 1
4: 4: full x
0...4 0
HY_O_A Offset when the elevator starts up
Speed of pump at which the cabin moves
0...10000 2000
HY_t_A Delay time when the elevator starts up
Time during which the value of HY_O_A is maintained
10...3000 ms 500 ms
HY_OFFS Offset when the cabin arrives at the fl oor
Speed of pump at which the cabin no longer moves
0...10000 0
HY_LA_l No-load current in the case of empty cabin
0.1...100.0 A 28.0 A
HY_LA_V Speed gain in the case of fully loaded cabin
1...500 25
HY_NACH Adjustment value
100...8000 2000
FIL_V_D Filter time constant V_DCP
Determination of speed via DCP control
2...2048 16
INFO menu
DCP Ident - - - - - - - - 14
Info: xx
0101 / 010106 en
Load: ---% 211.0mm/s
Page 14: DCP-Ident
Information about the control system
Line 2:
Manufacturer
Line 3:
Software version of control system
Software date of the control system
Operating language set in the control system, display according to ISO639
The operating language of the ZAdyn4CA HY is automatically adapted.
Line 4 (only with DCP4):
current speed in mm/s
Quick Start Guide ZAdyn4CA HY Parameter list
R-TBA16_01-GB 1845 Index 003 Part.-No. 00163456-GB
18/28