4.1.1
Switch cabinet installation
CAUTION!
Attention!
The device is designed for installation on the machine carrier in the lift shaft. An adequate cooling must
be ensured for assembly in the switch cabinet. The power loss of the device (see chapter "Technical
Data") must be taken into account here.
The speci
fi
ed installation position and the minimum distances must be observed when assembling in
the switch cabinet.
4.1.2
Wall installation
CAUTION!
Attention!
The minimum distances and the installation position must be observed for wall mounting (see chapter
"Dimensions / minimum distances").
4.1.3
Fixation
The ZAdyn4C MRL has a fastening variant which matches the special installation situation of the
device.
4.1.3.1
Procedure
"
Fix the fastening plate (6) to the machine carrier with 4 fastening screws (2).
"
for ZAdyn4C MRL AI: Feed the cables through the opening (5) in the centre of the fastening plate.
"
Push the housing (1) of the ZAdyn4C MRL into the hooks (4) of the fastening plate (6).
"
Screw together both parts with 2 fastening screws (3).
1
2
3
4
5
6
Original operating instructions
ZAdyn4C MRL
Mechanical installation
R-TBA14_01-GB 1845
Part.-No. 00163419-GB
6/44
