4.4
Fastening the brake
The drive will be delivered with the mounted brake.
Brake
fi
xation in accordance with the brake operating instructions.
Information
An exchange of the brake can be carried out only with special centering tool. Please contact
the ZIEHL-ABEGG SE customer service in case of a brake exchange!
4.5
Fastening rope protection clamp
"
The drive unit is equipped with two rope protection clamps (1).
"
Each of the two rope protection clamps will be fastened at the bearing bracket with a screw
M10 x 16 and a washer.
Tightening torque M10 - 8.8: 46 Nm
"
Through the longholes in the clamp the required distance to the ropes can be adjusted.
"
The rope protection clamps must be fastened in a distance of 2 - 3 mm to the ropes.
"
On installations with rope pull upwards a protection must be installed to prevent foreign
bodies to entering between rope and traction sheave.
5 Electrical installation
5.1
Safety precautions
Mounting, electrical connection and commissioning are only to be performed by trained service
personnel. Adhere to all machinery-related requirements and speci
fi
cations supplied by the system
manufacturer or machine builder.
5.2
EMC directive
The adherence to the EMC Directive 2004/108/EC only pertains to this product if frequency inverters
tested and recommended by ZIEHL-ABEGG SE are used, which have been installed in accordance
with the corresponding frequency inverter description and in line with the EMC. If the product is
integrated unprofessionally into a system or complemented by and operated with components (e. g.
regulators and controllers) which have not been recommended, the operator of the complete system
alone shall be responsible for adhering to the EMC Directive 2004/108/EC.
2ULJLQDORSHUDWLQJLQVWUXFWLRQV
ZAtop
–
model series SM225.40B
Electrical installation
A-TBA13_06-GB
Part.-No. 01009090-GB (
(8%'
)
8/72
