8.3.1.3
Mounting the absolute encoder
CAUTION!
Caution!
Never touch the connection contacts on the position absolute encoder or on the cable! The electronics
can be destroyed by static electricity.
1. The brake is used to centre the absolute encoder.
2. Remove the cover of the encoder (2) with an allen wrench SW 4. Plug (6) of the encoder cable
in the correct position purely pressed in position.
3. Push the bush (7) of the encoder cable in the correct positional arrangement.
4. Attach the absolute encoder to the drive shaft with the screw M10 x 25 (4).
5. Remove the screw M10 x 25 (4).
6. Provide threadlocker Loctite 243 (5) or similar threadlocker material to the thread of the central
fi
xing screw (3).
2ULJLQDORSHUDWLQJLQVWUXFWLRQV
ZAtop
–
model series SM225.40B
Service and maintenance
A-TBA13_06-GB
Part.-No. 01009090-GB (
(8%'
)
21/72
