L
-B
A
L-
E053
-G
B
-0
838
I
nd
e
x 00
1
(78453E
)
L
-B
A
L-
E053
-G
B
-0
838
I
nd
e
x 00
1
(78453E
)
8.2 Assembly steps
1. Connect the wires to the terminals in the
recessed part (observe the connection
diagram in Section 8.3).
2. Install and screw the recessed part in the
flush-type box (note the installation
direction, terminals at the top).
3. Place the upper part on the recessed part
(first attach the upper hook and then snap
it down, see diagram).
8.3 Connection diagram
All connection terminals are equipped with slotted
screws.
A normal screwdriver with 3 mm blade can be used to
tighten the screws.
Connection diagram
- 15 -
8.2 Assembly steps
4. Connect the wires to the terminals in the
recessed part (observe the connection
diagram in Section 8.3).
5. Install and screw the recessed part in the
flush-type box (note the installation
direction, terminals at the top).
6. Place the upper part on the recessed part
(first attach the upper hook and then snap
it down, see diagram).
8.3 Connection diagram
All connection terminals are equipped with slotted
screws.
A normal screwdriver with 3 mm blade can be used to
tighten the screws.
Connection diagram
- 15 -
