L
-B
A
L-
E053
-G
B
-0
838
I
nd
e
x 00
1
(78453E
)
L
-B
A
L-
E053
-G
B
-0
838
I
nd
e
x 00
1
(78453E
)
5.3.5 Adding a new switching time
After selecting the empty switching time, press the SET key.
The hour display flashes and can be
changed with the + and – keys. Press
the SET key to confirm the hour setting;
the minute value then starts to flash.
This value can now be changed in 10-
minute intervals with the + and – keys and confirmed with the
SET key.
The same procedure is used for the day selection and for the
temperature selection. In the case of the day selection, the
weekdays are shown first individually and then as groups Sa-
Su, Mo-Fr, Mo-Sa, Mo-Su.
Note
: Groups of days. If a group of days is selected, an
individual program item with the specified time and the
temperature level is created for each selected day of
the group. The complete grouping cannot be changed,
rather only the individual program items can be
changed.
After the last confirmation with SET, the changed switching
time will be stored and the next switching time in chronological
sequence displayed.
5.3.6 Cancelling time program settings
The PROG key can be used to cancel the settings for a
switching time currently open for processing. Any previous
changes will not be stored. Press the PROG key again to
return to the program menu or to the normal display.
5.3.7 Special programming cases
No empty switching time will be offered if no further switching
time is available.
If a group of days is programmed although insufficient
switching times are available,
FULL
and the number of
available switching times will be displayed. This allows the
user to decide how many switching times are missing or
whether he can make his required program using specific
days.
If a group of days matches an existing switching time, the
existing switching time will be overwritten without prompt.
If a new switching time is placed at the time of an existing
switching time, the existing switching time will be overwritten
without prompt.
If an existing switching time is changed and placed at a time
already occupied by another existing switching time, the
existing switching time will be overwritten without prompt.
Redundant switching times (switching times in the time
program that do not cause any change of the temperature
level) are not automatically detected or removed. The user
himself must delete such switching times when free switching
times are required.
- 11 -
5.3.5 Adding a new switching time
After selecting the empty switching time, press the SET key.
The hour display flashes and can be
changed with the + and – keys. Press
the SET key to confirm the hour setting;
the minute value then starts to flash.
This value can now be changed in 10-
minute intervals with the + and – keys and confirmed with the
SET key.
The same procedure is used for the day selection and for the
temperature selection. In the case of the day selection, the
weekdays are shown first individually and then as groups Sa-
Su, Mo-Fr, Mo-Sa, Mo-Su.
Note
: Groups of days. If a group of days is selected, an
individual program item with the specified time and the
temperature level is created for each selected day of
the group. The complete grouping cannot be changed,
rather only the individual program items can be
changed.
After the last confirmation with SET, the changed switching
time will be stored and the next switching time in chronological
sequence displayed.
5.3.6 Cancelling time program settings
The PROG key can be used to cancel the settings for a switching
time currently open for processing. Any previous changes will not
be stored. Press the PROG key again to return to the program
menu or to the normal display.
5.3.7 Special programming cases
No empty switching time will be offered if no further switching
time is available.
If a group of days is programmed although insufficient
switching times are available,
FULL
and the number of
available switching times will be displayed. This allows the
user to decide how many switching times are missing or
whether he can make his required program using specific
days.
If a group of days matches an existing switching time, the
existing switching time will be overwritten without prompt.
If a new switching time is placed at the time of an existing
switching time, the existing switching time will be overwritten
without prompt.
If an existing switching time is changed and placed at a time
already occupied by another existing switching time, the
existing switching time will be overwritten without prompt.
Redundant switching times (switching times in the time
program that do not cause any change of the temperature
level) are not automatically detected or removed. The user
himself must delete such switching times when free switching
times are required.
- 11 -
