L
-B
A
L-
E053
-G
B
-0
838
I
nd
e
x 00
1
(78453E
)
L
-B
A
L-
E053
-G
B
-0
838
I
nd
e
x 00
1
(78453E
)
5.4 Vacation function
The device provides with the
UrLb
menu item a vacation
function. This allows the time program to be suspended for a
maximum period of one year. To ensure that the vacation
program does not repeat itself every year, it will be deleted
automatically when the vacation period expires.
5.4.1 Setting the vacation period
First select the
UrLb
item in the
program menu. Once this has been
confirmed with SET, either a previously
programmed vacation start or an
"empty" vacation program will be
displayed.
Press the SET key to automatically accept the current date as
vacation begin.
The + and – keys can now be used to change the month
(flashing).
After confirming the month with SET, the day of the vacation
start can be changed similarly.
After confirming the day with the SET
key, the display switches to vacation
end (automatically initialized with the
date of the vacation start).
The + and – keys can now be used to
change the month (flashing).
After confirming the month with SET,
the day of the vacation end can be
changed similarly.
Press SET again to set similarly the
temperature level (comfort, lowering or
frost-prevention temperature) to be
maintained during the vacation period.
Press SET again to close the setting of
the vacation program.
Press the PROG key to exit the program menu.
When the date of the automatic control device reaches 0:00
am on the specified vacation day, the system will be regulated
to the set temperature level. The active vacation program with
the end date is now displayed in the display.
5.4.2 Deleting a vacation period
To completely delete a specified vacation period, the two "+"
and "-" keys must be pressed together for more than
2 seconds when the vacation start or end is displayed. The
automatic control device deletes the vacation period and
returns automatically to the menu selection.
Press the PROG key to exit the program menu.
- 12 -
5.4 Vacation function
The device provides with the
UrLb
menu item a vacation
function. This allows the time program to be suspended for a
maximum period of one year. To ensure that the vacation
program does not repeat itself every year, it will be deleted
automatically when the vacation period expires.
5.4.1 Setting the vacation period
First select the
UrLb
item in the
program menu. Once this has been
confirmed with SET, either a previously
programmed vacation start or an
"empty" vacation program will be
displayed.
Press the SET key to automatically accept the current date as
vacation begin.
The + and – keys can now be used to change the month
(flashing).
After confirming the month with SET, the day of the vacation
start can be changed similarly.
After confirming the day with the SET
key, the display switches to vacation
end (automatically initialized with the
date of the vacation start).
The + and – keys can now be used to
change the month (flashing).
After confirming the month with SET,
the day of the vacation end can be
changed similarly.
Press SET again to set similarly the
temperature level (comfort, lowering or
frost-prevention temperature) to be
maintained during the vacation period.
Press SET again to close the setting of
the vacation program.
Press the PROG key to exit the program menu.
When the date of the automatic control device reaches 0:00
am on the specified vacation day, the system will be regulated
to the set temperature level. The active vacation program with
the end date is now displayed in the display.
5.4.2 Deleting a vacation period
To completely delete a specified vacation period, the two "+"
and "-" keys must be pressed together for more than
2 seconds when the vacation start or end is displayed. The
automatic control device deletes the vacation period and
returns automatically to the menu selection.
Press the PROG key to exit the program menu.
- 12 -
