INLET CHAINS
27
27.
Inlet Chains
Diagram 28
Inlet chains
Chain tensioning device
The inlet chains are tensioned automatically and maintenance-
free via consistent spring tension.
When do the inlet chains require to be exchanged?
If the maximum tensioning point of the tensioning device is
reached, the chain must be replaced. The inlet chain must also be
replaced in the vent of damage, e.g. through foreign matter.
Attention!
Also observe the level of wear of the front diversion wheels
when you evaluate the inlet chains!
Diagram 29
Disassembly of the inlet chains
Loosen the screw (A) and slide the diversion wheel (B) to the
back.
Now remove the chain.
Normal clearance: 1m
If worn: +3,5cm.
A
B
