DOS Drivers and Utilities
25
1. Select a Rendering Display Device. Since TurboDLDClassic is a combined display/rendering
device, choose item 1, P386 ADI Combined Display/Rendering Driver, from the available
choices.
2. Configure the Rendering Graphics Board and Resolution:
a. The TurboDLDClassic configuration program appears on the screen. Press the
[Enter]
key to
continue past the help screen and display the Rendering Configuration menu.
b. Choose Select Graphics Board/Resolution to display graphics board and resolution menu
selections.
c. Choose Select Render Graphics Board to select the graphics board to be used for renderings.
d. Choose Select Render Resolution to select the desired rendering resolution from the list of
available choices.
e. Select Return to Previous Menu.
f. Select Save and Exit.
3. Select Render Mode, then select the rendering mode for TurboDLDClassic. Select either Render
to Viewport or Render to Screen, depending on how you wish to view your renderings. Note that
in order to render to a viewport you must be using a display resolution of at least 256 colors.
Otherwise, AVE Render does not allow a render to viewport selection.
4. Select a Render Hard Copy Device. If you are using a render hard copy device, select your device
type from the list of choices. If you are not using a hard copy device, accept the default of NULL.
After configuring AVE Render, return to the drawing and render it.
Reconfiguration
If you have previously configured AVE Render, type
RCONFIG[Enter]
at the AutoCAD command
prompt to manually display the Render Configuration menu. Follow these steps to re-configure AVE
Render.
1. Select option 2, Configure Rendering Device to choose a new rendering driver. Answer
[Yes]
to
the Select Different Rendering Device question.
2. Select option 1, P386 Combined Display/Rendering Driver. The TurboDLDClassic configuration
program appears on the screen.
3. Configure the rendering graphics board and resolution.
a. Press the
[Enter]
key to continue past the help screen and display the Rendering
Configuration menu.
b. Choose Select Graphics Board/Resolution to display graphics board and resolution menu
selections.
c. Choose Select Render Graphics Board to select the graphics board to be used for rendering.
d. Choose Select Render Resolution to select the desired rendering resolution from the list of
available choices.
e. Select Return to Previous Menu and then Save and Exit.
4. Select the rendering mode for TurboDLDClassic. Select either Render to Viewport or Render to
Screen, depending on how you wish to view your renderings. Note that in order to render to a
viewport you must be using a Display resolution with at least 256 colors. Otherwise, AVE Render
does not allow a render to viewport selection.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
