manualshive.com logo in svg

Zhuhai RaySharp Technology RS-CH772H1B-36-RF, User Manual, Page: 25 / 27

Share
Download
Zhuhai RaySharp Technology RS-CH772H1B-36-RF User Manual Download Page 25

User Manual 

24 

10.3 System Maintenance 

Click on System Maintenance in Advanced menu to open the following page:   

 

Here you can set regular restart or manual restart of the device.   

 

 

 

 

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

Summary of Contents for RS-CH772H1B-36-RF




























Reviews:

No comments