background image

User Manual 

15 

Frame rate: 

When refresh rate is 50Hz, the maximum available frame rate is 25 fps. When refresh rate is 60Hz, 

the maximum available frame rate is 30 fps.   

Audio: 

Enable audio for each bit stream.   

I frame interval: 

Set I frame interval.   

Bitrate control: 

Set constant or variable bitrate for bit stream.   

Bit stream: 

Set bit stream value by choosing fixed value or customizing it.   

Note: Range of main bit stream is32-8192.   

Range of sub-bit stream is 32-4096.   

Range of cell phone bit steam is 32-1024.   

6.4 E-Mail Configuration 

Click on E-Mail Configuration in Network Parameter menu to open the following page:

   

             

 

E-Mail Configuration: mail service setting - used with alarm function to upload images snapped to the mail server.   

Enable e-mail: 

Enable or disable e-mail function.   

Port: 

The default port number is 25 (mail serve port).   

SMTP server: 

Enter the address of mail server.   

Address of sender: 

Address of sending mailbox   

Password of sender: 

Password of sending mailbox                                         

Address of recipient: 

Address of receiving mailbox,( 

can add 3 to receive email address)

                                         

Time interval: 

Time interval for sending mail (1 minute, 3 minute, 5 minute, 10 minute) 

 

 

Summary of Contents for RS-CH772H1B-36-RF




























Reviews: