Zhuhai RaySharp Technology RS-CH772H1B-36-RF, User Manual, Page: 19 / 27

Share

4 pages before
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27

Page: 19 / 27

Zhuhai RaySharp Technology RS-CH772H1B-36-RF User Manual Download Page 19

User Manual

18

FTP

: FTP service setting - used with alarm function to upload images or videos snapped to the FTP server.

FTP:

Enable or disable it.

User name:

The user name for access to FTP service

Password:

The password for access to FTP service

FTP Server:

Enter the address of FTP server.

Port:

FTP service port number; the default number is 21.

Transmit Image:

Check it to transmit image

7. Alarm Parameter

7.1 Mobile Detection

Click on Mobile Detection in Alarm Parameter menu to open the following page:

Procedure of setting Mobile Detection:

1.

Check Enable Mobile Detection.

2.

Press down and hold the left mouse button and drag out an area for mobile detection.

3.

Set the sensitivity for mobile detection (ranging from 1 to 8; larger value indicates higher sensitivity).

4.

Used with SMTP to enable mail delivery.

5.

Click on Save to apply the settings.

6.

Record: Record time (5s.10s.20s.30s)

7.

Mail Notification

8.

Upload image To FTP

«
...
17
18
19
20
21
...
»

Summary of Contents for RS-CH772H1B-36-RF




























Reviews:

No comments