Zhone iMarc SLV 9126 Installation Instructions Manual Download Page 32

32

9126-A2-ZN11-40

EMI Notices

UNITED STATES – EMI NOTICE:

!

This equipment has been tested and found to comply with the limits for a Class A 

digital device, pursuant to Part 15 of the FCC rules. These limits are designed to 

provide reasonable protection against harmful interference when the equipment is 

operated in a commercial environment. This equipment generates, uses, and can 

radiate radio frequency energy and, if not installed and used in accordance with the 

instruction manual, may cause harmful interference to radio communications. 

Operation of this equipment in a residential area is likely to cause harmful 

interference, in which case, the user will be required to correct the interference at his 

own expense.

The authority to operate this equipment is conditioned by the requirements that no 

modifications will be made to the equipment unless the changes or modifications are 

expressly approved by Zhone Technologies.

CANADA – EMI NOTICE:

!

This Class A digital apparatus meets all requirements of the Canadian 

interference-causing equipment regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du règlement sur le 

matériel brouilleur du Canada.

Summary of Contents for iMarc SLV 9126





































Reviews: