22
9126-A2-ZN11-40
Configuring SNMP Trap Managers and
Trap Dial-Out
Once the iMarc unit is connected to the network, SNMP trap managers, SNMP traps, and trap
dial-out can be configured.
Procedure
1
Select SNMP Traps.
Main Menu
→
Configuration
→
Management and Communication
→
SNMP Traps
2
Configure the following:
— Enable SNMP Traps.
— Identify the total Number of Trap Managers.
— Specify the IP address of the NMS(s) to which traps will be sent.
— Specify the network Destination for the Trap Manager(s).
— Select desired trap categories.
— Enable Trap Dial-Out, if desired.
3
Save the configuration.
4
Return to the Main Menu.
