18
Logging Into the CLI
Once your terminal emulation program has been launched, device information is
displayed, followed by a request for username and password. You must log in as a
superuser in order to make configuration changes.
Username: superuser
Password: Password
Using the CLI to Establish In band Management
Option 1:
After you have logged in, enter a question mark (?) to list the available commands.
CLI Set commands are used to establish inband management. For example:
set slot 1 ip_address 137.182.10.251
set slot 1 subnet_mask 255.255.255.0
set slot 1 default_gateway 137.182.10.10
The Subscriber unit in this example can now be managed with web management by
attaching a PC to one of the network extender’s Ethernet ports or through the DS3
ports by opening the address 137.182.10.251 in a web browser.
Option 2:
After you have logged in, enter “H” for Help, to list the available commands.
CLI commands are used to establish inband management. For example:
cd syscfg
cd mgtcfg
ipaddress 137.182.10.251
subnetmask 255.255.255.0
defaultgateway 137.182.10.10
submit
Note – It is necessary to type “submit” and hit “enter” for the settings to be enabled
