Zhone 6738 User Manual Download Page 11

Page: 11 / 151

ZHONG 6738 User Manual

3 Hardware Description and Installation

Note:

The figures in this document are for reference only.

3.1 Hardware Description

3.1.1 Front Panel

Figure 1 Front panel

The following table describes the indicators on the front panel.

Indicator

Color

Status

Description

The device is powered on and the device operates

normally.

Green

Off

The device is powered off.

The device is initiating.

Power

Red

Blinking

The software is upgrading.

DSL link has been established.

Fast

Blinking

The DSL line is training.

DSL Green

Slow

Blinking

DSL Link is turned off.

The connection to the Internet has been established

successfully in the routing pattern.

Blinking

Internet data is being transmitted.

Green

Off

Ethernet interface is disconnected.

Internet

Red

The Authentication is failed.

LAN

Green On

The Ethernet link is connected.

Summary of Contents for 6738
























































































































































Search results

Summary of Contents for 6738

Reviews:

Related manuals for 6738

Brands by name

Popular brands

Zhone 6738, User Manual

Search results

Summary of Contents for 6738

Reviews:

Related manuals for 6738

Brands by name

Popular brands